ESSER SERIES
MAIN MENU
THE ESSER PIPE SERIES
THREE PERFORMANCE OPTIONS
ESSER 400
Two-layer pipe system for conveying abrasive material. The inner wear layer is evenly hardened to 63 HRC. The outer pipe is pressure-bearing and protects the inner pipe from torsional or bending forces. In use since 1980 and constantly improved. ESSER TWIN 700 PROVEN FOR DECADES BEST PERFORMANCE IN USE WORLDWIDE
ESSER TWIN 900
COST-EFFECTIVE GOOD PERFORMANCE
Double-layer elbows and elbow outlet pipes for conveying highly abrasive material. Used at critical points in the overall conveying line. The inner wear layer is made of special CCI chilled cast iron with a hardness of 67 HRC. FOR EXTREME CONDITIONS TOP PERFORMANCE MAXIMUM SERVICE LIFE
The entry into hardened piping systems. Single-layer, internally hardened pipes and elbows for conveying slightly abrasive media. The components are internally hardened up to 45 HRC. The hardness increases linearly from the outer wall to the inner wall.
Outer wall
Inner wall
Outer wall
Inner wall
Outer wall
Inner wall
ESSERTWINPIPES.COM | 04
Powered by FlippingBook